The Thermo Scientific compact, low cost incubators are use-
ful for biochemical, bacteriological and hematological studies.
They provide a controlled environment for growing microor-
ganisms, as well as, for the study of chick and invertebrate
embryos.
All models have specially designed heaters to eliminate the
hazards of open-wire internal heaters. A pilot light indicates
when the heaters are activated. Solid, corrosion resistant alu-
minum chamber walls with 1-inch (2.5cm) fiberglass insulation
help to distribute heat evenly throughout the chamber.
Powder coated, durable, heavy gauge steel exteriors make
the units easy to clean and maintain. A bimetallic thermostat
controls temperature.
Models 105, 106, 125 and 126 have an acrylic outer door but,
otherwise, provide the same performance as the other units.
Models 150, 150JPN and 152 are Educational Incubators with
acrylic outer doors. These units are intended for egg incuba-
tion and are not to be used for clinical purposes.
4
ON
OFF
HEAT
Power Switch
Status Lamp
#440-359-00
#360-235-00 (Lens),
#360-233-01 (Lamp base)*
Front view
Left-side view
Thermostat
#920-273-00 (Thermostat),
#560-230-00 (Knob)*
*As listed on upcoming replacement parts list.
Introduction
