Thermo Scientific ID Scribe, Руководство пользователя

Страница: 60 / 64

FAQs
10-2 ID Scribe User Manual Thermo Scientific
A:
Currently only ASCII text and the "micro" symbol ( μ ) are available.
Q: How much can I print on the labware with the ID Scribe?
A:
Its possible to print up to 40 characters in each of the three lines, but this may not all fit
onto your labware so you should test your own labware?
Q: Can I change the font in the ID Scribe software?
A: No, the font is preset in the software.
Q: Can I print barcodes on my labware with the ID Scribe?
A: No.
Q: How fast does the ID Scribe print on my labware?
A:
It varies by the type of labware and the amount of text, but typically a rack takes 5-7
minutes.
Q: Does the ID Scribe work with MACs?
A: Yes, as long as you are using a recent version of Mac Office and OS X.
Q:
Can ID Scribe work with LIMS to use that data to create the Excel sheet for
writing?
A:
Typically LIMS have an export function that incudes exports to Excel format. Once its
into Excel, column A must be changed so that it indicates the labware location in the rack
of the ID Scribe.
Q: My software says "Cannot find ID Scribe"…what do I do?
A:
You can still load your Excel file and print in most cases. It will "find" the ID Scribe once
you hit "print" on the software. If there are any problems, contact technical support.
Q: Why does the ID Scribe double write on the first line of text?
A:
If the pen sits idle in the ID Scribe it can be a bit dry when it starts up, so it double writes
to ensure that the first line is clear.
Q: How do you keep the pen on the ID Scribe from drying out?
A:
If you must leave the pen for long periods of time without writing (~30 minutes), remove
the pen and cap it to preven drying.
Q: How long is the warranty on the ID Scribe?
A: The warranty is 1 year from receipt. Extended warranties are available.
Q:
Can I use the output from my barcode reader (e.g., VisionMate) to print on 2D
tubes?
A: Yes. Direction for integration of the 2D reader are included in the manual.
Q: Can I remove the dust/safety cover?
A:
If you remove the housing you can remove the dust cover. Contact technical support for
help.
Q: How can I tell what rack to use with what labware?
A: Consult the Cross Reference Guide.
+Q: Can I spray down the ID Scribe with ethanol, diluted bleach, Spore Klenz, etc.?
A: Yes.
Q: Can I autoclave the racks?
A: Yes.
Q: Is it possible to load the racks and rack lifter in the wrong orientation?
A: No, there are features to make sure you cannot load the rack and lifter "backwards".
Q:
Why does the ID Scribe printing head move but not print right away when I start it
up?
A: The ID Scribe is "homing" itself to be sure it prints in the right location on your labware.