Thermo Scientific iCAP Q, Руководство по эксплуатации

Страница: 95 / 134

Maintenance
Servicing Plan
Thermo Fisher Scientific iCAP Q Operating Manual (P/N 1288090, Revision B) 8-5
Servicing Plan
Routine and infrequent maintenance procedures to be performed by the
user are listed in
Table 8-1 .
Table 8-1. Maintenance procedures
Item Procedure Frequency Procedure location
Inlet system
•
Peristaltic pump
tubing Check for clogging or damage Daily page 6-9
Replace the tubing If necessary page 8-12
•
Nebulizer Clean the nebulizer If necessary page 8-12
Replace the nebulizer If necessary page 8-11
•
Spray chamber Clean the spray chamber If necessary page 8-13
Replace the spray chamber If necessary page 8-13
•
Injector Clean the injector If necessary page 8-14
Replace the injector If necessary page 8-14
•
Torch Clean the torch If necessary page 8-15
Replace the torch If necessary page 8-15
Interface
•
Cones Cleaning the cones Depending on operation
condition page 8-19
Replacing the skimmer cone
insert Depending on operation
condition page 8-21
•
Extraction lens Maintaining the lens Depending on operation
condition page 8-23
Gas supply Leak check gas lines Annually page 8-8
Air Filter Check fan Monthly page 8-9
Clean filter If necessary page 8-9
Instrument Clean surface If necessary page 8-7
Check warning labels Annually page 8-7