Thermo Scientific FISHER HAMILTON MAX/WALL, Руководство по установке

Страница: 26 / 60

MAX/Wall
®
Technical Wall System
26
Section 3 – Installing Wall Frames
Figure 3-16 Corner Filler – Four-Way
Island Panel
Uprights
3-Way Corner
Bracket
3/8"-16 Nut
3/8" Washer
3/8"-16 Bolt
4. For an 84" high end filler panel, insert the upper
tab on the end filler panel over the flange on the
upper bracket – filler panel must be tilted out
slightly at its base to do this. Push the filler panel
in firmly against panel uprights and slide down to
engage lower tab on the end filler over the flange
on the lower bracket.
3.9 Corner Filler – Three- and
Four-Way Connector/Fillers
Tools Required:
9/16" Wrench
Hardware Included – Three-Way:
12 HHCS, 3/8-16 x 2-1/2" Grade 5
12 Hex Nut, 3/8-16
24 Washers
Hardware Included – Four-Way:
16 HHCS, 3/8-16 x 2-1/2" Grade 5
16 Washers
Procedure:
Refer to Figure 3-16:
1. Loosely assemble the brackets to one of the wall
frame uprights using the appropriate length of
3/8" bolts.
2. Position the remaining two or three wall frames
against the brackets on the first wall frame and
loosely assemble them to the brackets using the
appropriate length of 3/8" bolts.
3. Align all of the wall frames checking that they are
square and level, and tighten all the 3/8" bolts.
3/8" Washer
End Panel