6
Elite CTS Tester Operating Instructions
Factory Reset
Reset the CTS tester to the factory default by using the factory reset function.
1. Press to enter setup window. Scroll down by pressing the
to select Reset. Press
to select Reset. The
display shows User Reset and Fact Reset.
2. Scroll down by pressing
to toggle between the resets. Press
to select Fact Reset.
3. The display automatically shows No
and
Yes
.
Scroll down by pressing to toggle between No
and
Yes
.
4. Press
to confirm either No or Yes. The display shows
the Factory Reset option with a .
HOLD Function
This feature helps to freeze the display for a delayed observation.
1. Press
button to freeze the measurement. 2. Press
again to release the measurement.
Sensor Maintenance
1. Always keep the sensors electrodes clean. Rinse the electrodes with de-ionized water and wipe them dry with
clean cloth before storing with its protective cap. For cup type electrodes, remove the white plastic cup and insert
to thoroughly clean viscous solutions. Never scratch electrodes with a hard substance.
2. For better performance, soak the electrode in alcohol for 10 to 15 minutes and rinse with de-ionized water before
starting any measurement process. This is to remove dirt and oil stains on the electrode which may affect the
accuracy of the measurements.
Applications
The Elite CTS tester can be used for the following:
• Agriculture
• Drinking water Hydroponics
• Verification of reverse osmosis system operation
• Aquaculture
• Electroplating rinse tanks
• Water and wastewater treatment
• Aquariums and fish farms
• Printing industry
• Others
• Boiler blow-down
• Swimming pools
Warranty
This instrument is supplied with a warranty against manufacturing defects for a period of one year from the date of
purchase.
Measure
Settings
Temp Set
Key Info
Scroll
Accept
EXIT
User Reset
No
Yes
Reset
Fact Reset
COND
µs/cm
820
23.5 °C
µs/cm
820
23.5 °C
COND
Press to
release
COND
µs/cm
820
23.5 °C
COND
µs/cm
820
23.5 °C
Press to
release
