Thermo Scientific EC300XL, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 20

EC300XL 1-1 Thermo Scientific
Section 1
Introduction
Thank you for selecting a Thermo Scientific EC300 Electrophoresis power
supply. This manual describes the operation of the EC300. The power
supply that you have purchased is the most productive and easy-to-use unit
available anywhere. This manual should answer any questions that might
arise in operating your power supply; however, don't hesitate to call our
Technical Services department if you need any assistance.
The EC300 power supply is designed to provide constant voltage or
constant current output to apparatus used in electrophoresis applications.
One to four sets of electrophoresis cells can be connected in parallel and
run simultaneously. The EC300 can deliver up to 75W of total output
power. When operating in constant voltage or constant current mode, the
power supply automatically limits the other parameter to either the power
supply maximum, or a lower limit if set by the user. If this non-constant
limit is reached, the power supply will automatically switch control modes,
from constant voltage to constant current, or vice versa. In this way, the
EC300 protects your electrophoresis cells from damaging over power
conditions. The EC300 power supply also provides for timed operation in
either voltage or current modes, and allows an automatic completion in
the event of a power loss if enabled by the user.
• 10-300V, adjustable in 1 volt steps
• 4-400mA, adjustable in 1mA steps
• 75W maximum output
• Automatic control mode crossover
• 0-999 minute timed run
• Automatic restart if loss of AC power (if enabled)
• Bright 3-digit display