Thermo Scientific E-Gel 4466611 Скачать руководство пользователя страница 33

Страница: 33 / 68

Software installation

Getting started

Minimum PC requirements

In order to install and operate both the E

‑

Gel

™

Imager and GelCapture software, your

PC must meet the following minimum requirements:

• Intel

™

Core

™

2 Duo processor, 1.8 GHz.

• Minimum 1 GB RAM of memory (2 GB recommended).
• 32 bit Windows

™

XP Pro (English version, SP 3) OR Windows

™

7 Professional

(English version) operating system, or Windows 10.

• Minimum monitor resolution of 1024 × 768 pixels.
• A free USB 2.0 port (Not compatible with USB 1.0 or 1.1).

Software installation guidelines

To install the GelCapture software and camera drivers, follow these guidelines:

• Log in as user with Administrator privileges (for installation only). Verify that you

are logged in as an Administrator before starting installation. If you do not have
Administrator privileges, contact your IT department for help.

• Change PC power setting to “Never Hibernate”.
• Make sure that the PC is

not

connected to the E

‑

Gel

™

Imager when installing the

GelCapture software.

• Install GelCapture software

before

turning on the E

‑

Gel

™

Imager and installing

camera drivers.

You do not have to have an active internet connection while performing software
installation.

Install GelCapture Software

Windows

™

XP professional

Insert the installation CD into the disk drive, and follow the instructions provided
by the installation wizard.

When the self-installation has completed, click on

Finish

to exit setup.

‑

Gel

™

Imager Gel Documentation System User Guide

Содержание E-Gel 4466611





































































Результаты поиска

Содержание E-Gel 4466611

Отзывы:

Похожие инструкции для E-Gel 4466611

Бренды по названию

Популярные бренды

Thermo Scientific E-Gel 4466611, Руководство пользователя

Результаты поиска

Содержание E-Gel 4466611

Отзывы:

Похожие инструкции для E-Gel 4466611

Бренды по названию

Популярные бренды