Compatible Sensors for Smart-Vue Pro Duo / Quatro Data Logger
Emerald Bluetooth Enabled Wireless Remote Sensors | 11
Key Specifications
•
Measured Ranges
:
-
Emerald with internal sensor: -40°C to +85°C.
-
Emerald with external Pt100 probe (available for)
-50°C to +200°C or -200°C to +50°C.
•
Protection index
: Conforms to IP44 for Emerald with
internal sensor, IP40 for Emerald with external
PT100 sensor, ABS / polycarbonate.
•
Operating environment for internal and external Emerald
sensor without Pt100 probe:
•
-40°C to +85°C.
•
0 to 90% relative humidity non-condensing.
Inserting the Battery into
your Emerald Sensor
Emerald wireless remote sensors feature a replaceable
battery. Follow these steps to insert or replace the battery.
Figure 3. Inserting the battery in your emerald
sensor
Activating an Emerald
Wireless Remote Sensor
In order for a Smart-Vue Pro data logger to be able to detect
an Emerald wireless remote sensor, you must first activate the
sensor as described here:
1. Place the “strong” side of the magnet (the side without
the adhesive tape) in the circular recess on the back of
the Emerald sensor and leave it there until the Smart-Vue
Pro data logger detects it. The non-adhesive side of the
magnet is noticeably stronger than the other.
Figure 4. Place the magnet on the sensor module
to activate bluetooth
2. Bluetooth connectivity is enabled and the LED blinks
blue. Once Smart-Vue Pro data logger discovers the
Emerald sensor, you may remove the magnet.
When within wireless range, the wireless remote sensor
appears in the sensor pairing screen of the Smart-Vue Pro
data logger. You may connect to it at any time as described in
Pairing a Bluetooth Wireless Remote Sensor
.
1. The Lithium battery
is provided in the
product box.
2.
Unscrew the three
screws on the back
of the sensor (turn
counterclockwise).
3. Remove the screws.
4. Place the battery in
the slot, respecting
polarity.
5. Replace screws
(turning them
clockwise). Ensure
that the rubber seal is
well seated.
6. Your sensor is ready to
use.
