Magnetic Stirrer
3-1
Thermo Scientific
Section 3
Installation
Check to see if there is any damage in the instrument packaging before
unpacking. Then unpack the instrument carefully. Inspect to see that the
instrument was not damaged during transportation.
Check the instrument components supplied in the package after
unpacking. If a noticeable issue or an omission is found, immediately
notify your local Thermo Scientific dealer’s Service Department.
▪
Temperature: 2°C ~ 60°C
▪
Relative Humidity: RH 10% ~ 80%
▪
Maximum Altitude: Up to 2000m
• The unit should be located away from naked flame sources, direct sunlight.
It can cause a malfunction or lower the function.
•
Place the unit onto a table as far as possible when in use and keep
suitable distance from other instruments.
• Do not place the unit near other laboratory equipment which can be readily
influenced, even by weak motor vibration.
Checking Instrument
Components
BASIC COMPONENT
QUANTITY/ RECEIVED
DESCRIPTION
Operating Manual
1/OK
-
Main unit
1/OK
-
Power cord
1/OK
-
Dimpled mat
1/OK
-
Rubber bands
2/OK
-
Installation
Environment
