Thermo Scientific Barnstead Smart2Pure 12 UF, Руководство по эксплуатации

Страница: 82 / 110

13
Maintenance
72
Smart2Pure Thermo Scientific
Step Action Figure
3 a. Pull the ultra-filter out of the mounting bracket.
b. Mark the position of the bottom fitting before you
remove them. Use the open-end wrench size
17mm/ 0.67 inch to unscrew the bottom fitting on
the ultra-filter.
4
When you install a new ultra-filter ensure that the arrow on
the filter corresponds to the direction of flow through the
filter (it must point upward).
a. Take the new ultra-filter and wrap the bottom
threads in Teflon strip (roughly 3 times around).
b. Take the fitting that you unscrewed in step 3b and
screw the fitting into the same position that it was
on the old ultrafilter. Use the 17mm/0.67 inch
open-end wrench for this.
c. Screw on the measuring cell and insert the tubes
into the top and bottom connection for the
ultra-filter and screw the fittings securely into
place.
d. Insert the ultra-filter back into the mounting
bracket and screw back the UV assembly into place
(
see Step 2c ).
a. Replace the cover on the system, open the
feedwater tap and switch the system on (connect
main power supply). Dispense the first 5 L of
water.
a.)
b.)
Ultra-filter
Mounting
bracket
UV lamp
Fitting
Ultra-filter
Open-end
wrench
a.)
Ultrafilter
Teflon tape
b.)
threaded
connection
Ultrafilter
c.)
Ultra-filter
UV lamp
Mounting
bracket
Fitting