Electrical Requirements
The Nanopure TOC - UV is equipped with 2 power cords to be plugged into an electrical outlet of the appro-
priate voltage.
U.K. customers use cord, CRX100 and fuses for 240V installation.
Model D11951, D12421 100-240 VAC, 100 watts, 47-63 Hz, 1 phase
Environmental Conditions
Operating:
4°C - 40°C; 20% to 80% relative humidity, non-condensing. Installation
Category II (over-voltage) in accordance with IEC 664. Pollution Degree 2 in
accordance with IEC 664.
Altitude limit: 3,500 meters.
Storage:
-25°C to 65°C; 10% to 85% relative humidity.
Declaration of Conformity
We hereby declare under our sole responsibility that this product conforms with the technical requirements of
the following standards:
EMC:
EN 61000-3-2 Limits for Harmonic Current Emissions
EN 61000-3-3 Limits for Voltage Fluctuations and Flicker
EN 61326-1
Electrical Equipment for Measurement, Control, and Laboratory Use; Part I:
General Requirements
Safety:
EN 61010-1
Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use; Part I: General Requirements
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Thermo Fisher Scientific
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.
7
G
ENERAL
S
PECIFICATIONS
Содержание Barnstead Nanopure TOC - UV
Страница 59: ...59 ...
