Thermo Scientific AFC-3000, Руководство по эксплуатации

Страница: 55 / 88

UltiMate 3000 Series:
AFC-3000 Automated Fraction Collector
Operating Instructions Page 49
5.2.3 Setting the Rack Configuration
Define the installed rack types in Chromeleon. It is not recommended to define a rack type
in a program file.
Important: The rack configuration must not be changed during fraction
collection, or during the course of a program file or sequence.
Important: Ne changez pas la configuration du rack au cours de la collection de
fraction, ou au cours d'un programme ou sequence.
1. Open the Commands dialog box ( → page 46).
2. Click the plus sign beside AFC .
3. Click Rack . In the Rack1 to Rack6 boxes, select the installed racks. If you have less
than six racks installed, select NotUsed for all unused rack positions. Note the
following restrictions:
• All racks have to be installed and defined following the order from Rack1 to Rack6 .
• Unused rack positions (=
NotUsed
) must always be the last positions. For example,
it is not allowed to set NotUsed for Rack1 and then select a rack type for Rack2 .
Observe the rack layout scheme (example for four 96 well plates see Fig. 18; details
for all rack types see page 31).
• Racks for 96 well plates must not be mixed with any other rack types.
4. Click Execute .
Fig. 18: Rack layout scheme (here: four 96 well plates)
(Tube numbering assumes SawVertical collect mode)