Password imputing interface
Input the password into the box.
Caution:
If the password has been forgotten, user
can use 000000 to ROOT and then the file will
be reset to the initial state (the name of the file
would not be changed).
Program setting interface
Press “BACK” to go back to
the listed files interface
Press “SAVE” to enter into
the files saving interface
Press “RUN” to enter into
the program running
interface. If the alteration of the program has not been saved yet, the
warning box will pop up.
Press “YES”, and the program will run in the changed form, but the
changes won’t be saved. Press “NO” to go back to the program setting
interface.
The user can set 1-5 sections of the program. Press
to delete the
corresponding section (when there is only one section, this step would
be of no use).
Press
to add sections. Choose the corresponding box to set the
corresponding temperature and time.
Caution
This instrument doesn’t have cooling function. If the user wants
to set multiple sections, set the temperature from low to high. Otherwise,
the temperature will be very slowly decreasing while the blocks cool down.
Drybath Incubator 6-3
Thermo Scientific
Section 6
Operation Guidance
Operation Instructions
(continued)
