Section 6
Operation Guidance
The chapter introduces the display window and the operation of buttons
of the dry bath with constant temperature.
Confirm the following before inserting the plug into the power socket.
1. Ensure the power source is in accordance with the voltage requirement
of the instrument (refer to Features section for voltage requirements).
2. Make sure the plug has been completely inserted into the power
socket.
3. Ensure the power line has been reliably grounded.
Caution
If the display of the instrument is abnormal after startup, turn off
the power source immediately and contact Thermo Fisher Scientific.
▲
Press the power switch and the instrument will be powered on. The LCD
screen of the operation panel will show the main interface.
The main interface
Press “Single point set” to
enter into the single setting
interface.
Single setting interface
Press “BACK” to go back to
the main interface.
Press “RUN” to enter into
the single running interface.
Press “Temp” to set the
temperature.
Press “Time” to set the time.
Instruction: There is limitation for temperature and time setting. The
setting temperature range is: 15
～
135°C
；
the time range is: 0
～
99
：
and “∞”.
Drybath Incubator 6-1
Thermo Scientific
Examination Before
Start-Up
Start-Up
Operation Instructions
59
