manualshive.com logo in svg

Thermo Scientific 20-35-NM-DIN, Руководство пользователя

Поделиться
Скачать
Thermo Scientific 20-35-NM-DIN Скачать руководство пользователя страница 7

 

 

vii

Thermo Fisher Scientific Warranty 

The seller agrees, represents, and warrants that the equipment delivered hereunder shall be free from 
defects in material and workmanship. Such warranty shall not apply to accessories, parts, or material 
purchased by the seller unless they are manufactured pursuant to seller's design, but shall apply to 
the workmanship incorporated in the installation of such items in the complete equipment. To the 
extent, purchased parts or accessories are covered by the manufacturer's warranty; seller shall extend 
such warranty to buyer. 

Seller's obligation under said warranty is conditioned upon the return of the defective equipment, 
transportation charges prepaid, to the seller's factory in Minneapolis, Minnesota, and the submission 
of reasonable proof to seller prior to return of the equipment that the defect is due to a matter 
embraced within seller's warranty hereunder. Any such defect in material and workmanship shall be 
presented to seller as soon as such alleged errors or defects are discovered by purchaser and seller is 
given opportunity to investigate and correct alleged errors or defects and in all cases, buyer must 
have notified seller thereof within two (2) years after delivery, or two (2) years after installation if 
the installation was accomplished by the seller. 

Said warranty shall not apply if the equipment shall not have been operated and maintained in 
accordance with seller's written instructions applicable to such equipment, or if such equipment shall 
have been repaired or altered or modified without seller's approval; provided, however, that the 
foregoing limitation of warranty insofar as it relates to repairs, alterations, or modifications, shall not 
be applicable to routine preventive and corrective maintenance which normally occur in the 
operation of the equipment. 

 “EXCEPT FOR THOSE WARRANTIES SPECIFICALLY CONTAINED HEREIN, SELLER 
DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO THE EQUIPMENT 
DELIVERED HEREUNDER, INCLUDING THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR USE. THE SOLE LIABILITY OF SELLER 
ARISING OUT OF THE WARRANTY CONTAINED HEREIN SHALL BE EXCLUSIVELY 
LIMITED TO BREACH OF THOSE WARRANTIES. THE SOLE AND EXCLUSIVE REMEDY 
FOR BREACH OF THE WARRANTIES SET OUT ABOVE SHALL BE LIMITED TO THE 
REPAIR OR REPLACEMENT OF ANY DEFECTIVE ACCESSORY, PART OR MATERIAL 
WITH A SIMILAR ITEM FREE FROM DEFECT, AND THE CORRECTION OF ANY DEFECT 
IN WORKMANSHIP. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL 
OR CONSEQUENTIAL DAMAGES.” 

Purchaser agrees to underwrite the cost of any labor required for replacement; including time, travel, 
and living expenses of a 

Thermo Fisher Scientific Field Service Engineer

 at the closest factory base. 

Thermo Fisher Scientific 

501 90th Ave. NW 
Minneapolis, MN  55433 
Phone:  (800) 445-3503 

Fax:  (763) 783-2525

 

Содержание 20-35-NM-DIN



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды