manualshive.com logo in svg

Thermo Scientific 20-35-NM-DIN, Руководство пользователя

Поделиться
Скачать
Thermo Scientific 20-35-NM-DIN Скачать руководство пользователя страница 4

 

iv  

 

2007 

Thermo Fisher Scientific

. All rights reserved. 

This document is confidential and is the property of 

Thermo Fisher Scientific

. It may not be copied 

or reproduced in any way without the express written consent of 

Thermo

. This document also is an 

unpublished work of 

Thermo Fisher Scientific

. 

Thermo Fisher Scientific

 intends to, and is 

maintaining the work as confidential information. 

Thermo Fisher Scientific

 also may seek to protect 

this work as an unpublished copyright. In the event of either inadvertent or deliberate publication, 

Thermo Fisher Scientific

 intends to enforce its rights to this work under the copyright laws as a 

published work. Those having access to this work may not copy, use, or disclose the information in 
this work unless expressly authorized by 

Thermo Fisher Scientific

. 

“

Microsoft

” and “

Windows

” are either registered trademarks or trademarks of 

Microsoft Corporation

 

in the United States and/or other countries. 

All other trademarks are the property of 

Thermo Fisher Scientific

 and its subsidiaries. 

Software Program Licence Terms 

The Software Program is licensed, not sold. 

Thermo Fisher Scientific

, grants you a license for the 

Software Program only in the country where you acquired the Equipment, as defined below. You 
obtain no rights other than those granted you under this license. 

The term “Equipment” means the equipment with which the Software Program is used. The term 
“Software Program” means the original and all whole or partial copies of the Software Program used 
in connection with Equipment sold by 

Thermo Fisher Scientific

 to the user, including modified 

copies or portions of the Software Program. 

Thermo Fisher Scientific

 retains title to the Software 

Program, as well as all improvements, modifications and enhancements to the Software Program, 
whether made by 

Thermo Fisher Scientific

 or any other party. 

Thermo Fisher Scientific

 owns, or has 

licensed from the owner, copyrights in the Software Program. 

You are responsible for the selection of the Equipment. 

Following the commissioning of the Equipment, any change made by the user to the Software 
Program will terminate all warranties with respect to the Equipment and Software Program. 

License 

Under this license, you may: 

1. 

Use the Software Program on only one piece of equipment at any one time, unless the license 
information specifies otherwise; 

2. 

Copy the Software Program for backup or in order to modify it; 

3. 

Modify the Software Program and/or merge it into another Software Program; and 

4. 

Subject to the following limitations, transfer the possession of the Software Program to another 
party, but only in connection with a transfer of the Equipment. 

Содержание 20-35-NM-DIN



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды