19
7. ADVANCED OPERATION
9. After a short period, the TouchPrint Printer decrypt the file and copies
it into the external flash memory. This process will also reset the CPU
and the boot-loader will start. When all files have been copied into
the external flash memory, the following image will appear.
CPU
FLASH
WAIT
10.Once the process is complete, the TouchPrint Printer will be restarted,
and the boot-loader will start copying the firmware from the external
flash into the MCU flash.
The error message that can appear in this menu are as follow:
NO DEVICE
No USB Flash Drive recognized
NO FILE
No files with .bin or .glo are present into
the flash drive
******************* The File name is too long (the file name plus
extension must be less than 19 character)
7.1.6 PARAMETER SETTING
This menu enables to set the following parameters in order to eliminate
any DATA transmission error. This option is mainly applicable when
Print by DATE option is enabled.
T1:
This is the maximum waiting time/ buffer time (in sec) between
the data request by the printer and the data transmission by the printer.
T2:
This is the Time (in sec) the printer will wait for the data during
the data transmission if any delay occurs from the Datalogger to
transmit each character.
T3:
This is the USER wait time (in sec) between 2 trip tickets when
TDP enabled. If the user tries to print immediately after a trip ticket
generation, a message 'Device Busy - Try again' will pop up.
T4:
This is the tolerance time (in sec) from the time of taking print to
the next printout without downloading new data for that duration.
(eg: If T4 = 600 sec / 10 mins, that means that the last 10 mins of
the selected period will not be included in the download and
subsequently in the printout). The aim is to speed up the ticket
generation.
.
7.1.7 ADJUSTING THE DATA AND TIME
1
Only the time of the display can be modified by the user in
the TouchPrint Printer. The time in the ticket is determined by
the datalogger (Cargowatch or DAS).
