Thermo King ThermoLite T-Series, Руководство по установке

Страница: 6 / 12

6
9. At the alternator, connect harness wires:
• RED/WHITE lead to the B+ positive terminal on the back of the alternator, add the small brass
washers on each side of the harness ring terminal on the B+ stud and torque to 6.0 N•m
(44-53 lb-in)
• BLACK lead to the (B-) negative terminal on the back of the alternator and torque to 6.0 N•m
(44-53 lb-in)
10. Secure all harnesses and wires adequately with cable ties.
11. Install nameplate on unit battery box (if equipped) or at unit battery connections on truck’s battery.
Figure 6: Make harness connections at unit alternator as shown and install nameplate.
12. Reinstall the harness fuse, reconnect the battery cables and switch unit controls to the on position.