Thermo King HK-430 HO, Руководство по установке

Страница: 23 / 46

22
Installing the Remote HMI
NOTE: The installation views shown are for reference only. The actual locations chosen for installing the remote HMI may vary per your specific
application and should not interfere with the operation of the trailer or container.
Surface Mount Installation
1. Position the HMI onto the surface of the front wall while providing a
drip loop as shown.
2. Open the front cover to access the four mounting holes.
• Secure to the trailer wall with the supplied T-25 Torx head self
tapping screws.
IMPORTANT: Do not overtighten the screws or the plastic enclosure
will be damaged.
3. Secure the harness to the trailer wall with the supplied clamps and self
tapping screws.
Flush Mount Installation
NOTE: Installer to provide a recessed pocket in the trailer wall to
accommodate the remote HMI. This recessed pocket must be deep
enough to help protect the HMI from damage and allow for water
drainage. See “HMI Remote Mount Dimensions” on page 15.
1. Position the HMI into the recessed pocket while providing a drip loop
as shown.
2. Open the front cover to access the four mounting holes.
• Secure to the recessed pocket with the supplied T-25 Torx head self
tapping screws.
IMPORTANT: Do not overtighten the screws or the plastic enclosure
will be damaged.
3. Secure the harness to the trailer wall with the supplied clamps and self
tapping screws.