Thermo King HK-430 HO, Руководство по установке

Страница: 19 / 46

18
Battery Selection Guide
Refer to Service Bulletin T&T 446 for more information regarding Battery Selection and Maintenance.
IMPORTANT: The specified battery, electrical wiring and electronic
controls were designed to operate and maintain only the Thermo
King refrigeration system and factory authorized Thermo King
options.
Trailer units are designed for one 12 volt, Group 31 battery supplied by the
installer.
The battery must be suitable for deep cycling, heavy duty and rated with a
minimum of 95 amp/hr.
NOTE: See following table for Thermo King approved batteries.
Refer to Service Bulletin T&T 446 for more information regarding
Battery Selection and Maintenance.
CAUTION: Do not connect other manufacturer’s equipment or
accessories to the Thermo King unit! This could result in
severe damage to equipment and void the warranty!
BATTERY APPLICATION TABLE
750 CCA Wet Cell
Thermo King ReliaMax 750S
P/N 203-731 Threaded Stud
P/N 203-730 SAE Post 925 CCA Wet Cell
Thermo King ReliaMax 925N
P/N 203-733 Threaded Stud
P/N 203-732 SAE Post 1150 CCA Dry Cell (AGM)
Thermo King EON
P/N 203-550 Threaded Stud
P/N 203-551 SAE Post
• Wet Cell Technology
• Better suited for warmer climates
• Less cranking power at low
ambient temperatures
• 18-24 month expected life *see
note below
• Choose for southern climates
• Wet Cell Technology
• Better suited for colder climates
• High cranking power at low
ambient temperatures
• 18-24 month expected life *see
note below
• Choose for northern climates
• Dry Cell (AGM) Technology
• Better suited for all applications
• High cranking power at lower
ambient temperatures
• Suited for extreme temperatures
• Best for high cycling applications
(Cycle-Sentry use)
• 5-7 year expected life
* NOTE: Wet cell battery life and maintenance requirements are determined by the operating environment and the
charge/discharge rate (cycles) while the battery is in service. Higher ambient temperatures and frequent discharges
will shorten a wet cell battery’s overall life expectancy and increase maintenance requirements.