manualshive.com logo in svg

Thermo Electron 3940 Series, Руководство по эксплуатации и техническому обслуживанию


Поделиться
Скачать
background image

9-2

Model 3940 Series

Thermo Electron Corporation

Section 9

W

arranty Information

THERMO ELECTRON CORPORATION INTERNATIONAL DEALER WARRANTY

The Warranty Period starts two months from the date your equipment is shipped from our facility. This allows for shipping
time so the warranty will go into effect at approximately the same time your equipment is delivered. The warranty protec-
tion extends to any subsequent owner during the first year warranty period. Dealers who stock our equipment are allowed
an additional six months for delivery and installation, provided the warranty card is completed and returned to the Technical
Services Department.

During the first year, component parts proven to be non-conforming in materials or workmanship will be repaired or replaced
at Thermo's expense, labor excluded. Installation and calibration are not covered by this warranty agreement. The Technical
Services Department must be contacted for warranty determination and direction prior to performance of any repairs.
Expendable items, glass, filters, reagents, tubing, and gaskets are excluded from this warranty. 

Replacement or repair of components parts or equipment under this warranty shall not extend the warranty to either the
equipment or to the component part beyond the original warranty period. The Technical Services Department must give prior
approval for return of any components or equipment. At  Thermo's option, all non-conforming parts must be returned to
Thermo postage paid and replacement parts are shipped FOB destination.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL OR

IMPLIED. NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY.

Thermo shall not be liable for any indirect or consequential damages including, without limitation, damages relating to lost
profits or loss of products.

Your local Thermo Sales Office is ready to help with comprehensive site preparation information before your equipment
arrives. Printed instruction manuals carefully detail equipment installation, operation and preventive maintenance.

If equipment service  is required, please call your Technical Services Department at 1-888-213-1790 (USA or Canada), or
1-740-373-4763. We're ready to answer your questions on equipment warranty, operation, maintenance, service and spe-
cial application.  Outside the USA, contact your local distributor for warranty information.

Rev. 2   1/03

ISO

9001

REGISTERED

Содержание 3940 Series















































































Отзывы:

Нет отзывов

Похожие инструкции для 3940 Series

Бренды по названию

Популярные бренды

Загрузить еще бренды