This manual, Code 20117299 - Rev. 3 (05/17) comprises 8 pages.
2
ENGLISH
GENERAL INFORMATION
GENERAL INFORMATION
RANGE
MODEL
CODE
TBPS 200
20117887
TBPS 300
20117888
TBPS 430
20117889
TBPS 550
20117890
TBPS 750
20117891
TBPS 1000
20117892
ACCESSORIES
For a complete list of accessories and details of their compati-
bility, refer to the Catalogue.
Dear heating engineer,
We would like to congratulate you on having recommended a
T
solar storage cylinder unit: a modern product
that's capable of ensuring a high degree of reliability, efficien-
cy, quality and safety.
While your technical skills and knowledge will certainly be
more than sufficient, this booklet contains all the information
that we have deemed necessary for the device's correct and
easy installation.
Thank you again, and keep up the good work,
Thermital
CONFORMITY
The
T
solar heaters comply with DIN 4753-3 and
UNI EN 12897.
CONTENTS
The following symbols are used in this manual:
b
CAUTION! =
Identifies actions that require caution and
adequate preparation.
a
STOP! =
Identifies actions that you MUST NOT do.
GENERAL SAFETY INFORMATION
b
Check that the product is complete, undamaged and as
ordered as soon as you receive it. Report any discrepan-
cies or damage to the
T
dealer who sold it.
b
This product must be installed by a legally qualified heat-
ing engineer. On completion of the installation, the install-
er must issue the owner with a declaration of conformity
confirming that the installation has been completed to
the highest standards in compliance with the instructions
provided by
T
in this instruction manual, and
that it conforms to all applicable laws and standards.
b
This product must only be used for the purpose for which
it is designed and made, as specified by
T
.
T
declines all responsibility, contractual or
other, for damage to property or injury to persons or ani-
mals caused by improper installation, adjustment, main-
tenance or use.
b
The product must be serviced at least once a year. Servic-
ing must be arranged in advance with the
T
Technical Assistance Centre.
b
All servicing and repairs must be performed by a quali-
fied heating engineer.
b
If water leaks from the storage cylinder, turn off the water
supply and contact
T
’s Technical Assistance
Centre or a qualified heating engineer immediately.
b
If the product is not going to be used for an extended
period of time, contact the manufacturer’s Technical As-
sistance Centre to have at least the following operations
performed:
- Close the shut-off cocks for the domestic hot water cir-
cuit
- Shut down the boiler connected to the storage cylinder
as instructed in its own manual
- Switch the storage cylinder OFF at the control panel (if
fitted) and at the mains power switch
- Drain the central heating circuit and domestic hot water
circuit if there is any risk of freezing.
b
This instruction manual is an integral part of the prod-
uct. It must be kept safe and must ALWAYS accompany
the product, even if it is sold to another owner or trans-
ferred to another user or to another installation. If you
lose this manual, order a replacement immediately. Keep
the product purchase documents to be presented to the
T
authorised Technical Assistance Centre to
request a service call under warranty.
b
Size the solar expansion tank so as to ensure complete
absorption of the expansion of the fluid contained within
the system, with reference to the prevailing regulations
on the matter. In particular, consider fluid characteris-
tics, considerable fluctuation of service temperature and
vapour that might be generated during solar collector
stagnation stage. Proper size of expansion tank ensures
setting off of all volume changes of the heat transfer fluid,
avoiding excessive pressure increase. Limited pressure
changes avoid reaching safety valve opening pressure
and the consequent fluid drainage.
This manual, Code
- Rev.
comprises
pages.
ENGLISH
General information
GENERAL INFORMATION 2
General Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . 3
Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
INSTALLATION 6
Unpacking the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembly of the insulation and the lining . . . . . . . . . . . . . . .
(models 750 - 1000). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Place of installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installation in older systems and systems requiring
modernisation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Water quality requirements. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Water connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Recycling and disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
END USER 8
Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Temporary shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Preparing for extended periods of disuse . . . . . . . . . . . . . . 8
External maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
