D
C
B
A
A
Shut-off tap
B
Cover
C
Filter
D
O-ring
Clean the filter as follows:
1. Switch off the heat pump.
2. Turn the shut-off tap (A) to the closed position.
3. Unscrew the cover (B) and remove it.
4. Remove the filter.
5. Rinse the filter (C).
6. Reinstall the filter.
7. Check that the O-ring (D) on the cover is not damaged.
8. Screw the cover back into place.
9. Turn the shut-off tap (A) to the open position.
10. Start the heat pump.
Brine circuit:
For the brine circuit filter, please contact your installer for advice.
User Guide
Thermia Legend
BWLE01UG0102
Thermia AB
22
