Thermia 12 ZP-TI, Руководство по эксплуатации

Страница: 6 / 68

GB-4
USING THE REMOTE CONTROL
LOADING BATTERIES
Use two size-AAA (R03) batteries.
1
Remove the remote control cover.
2
Insert batteries.
• Make sure the (+) and (-) polarities are
correctly a lign ed.
• The display indicates “AM 6:00” when
batteries are properly installed.
3
Reinstall the cover.
Remote
control cover
NOTE:
• The battery life is approximately 1 year in
normal use.
• When replacing the batteries, always change
both and use the same type.
• If the remote control does not operate properly
after replacing the batteries, take out the
batteries and reinstall them again after 30
seconds.
• If you will not be using the unit for a long time,
remove the batteries from the remote control.
2
3
1
USING THE REMOTE CONTROL
Point the remote control towards the receiver
window and press the desired button. The unit
generates a beep when it receives the signal.
• Make sure nothing, such as curtains, block the
signal receiver window.
• The signal effective distance is 7 m.
SETTING THE CURRENT TIME
There are two clock modes: 12-hour mode and
24-hour mode.
1
To set to the 12-hour mode, press
the CLOCK button once.
To set to the 24-hour mode, press
the CLOCK button twice.
2
Press the TIME ADVANCE or
REVERSE button to set the current
time.
• Hold down the button to advance or
reverse the time display quickly.
3
Press the SET/C button.
• The colon (:) blinks.
NOTE:
• The current time cannot be set when the timer
is operating.
CAUTION:
• Do not allow the signal receiver window to
receive strong direct sunlight, since it can
adversely affect its operation. If the signal
receiver window is exposed to direct sunlight,
close a curtain to block the light.
• Using a fluorescent lamp with a quick
starter in the same room may interfere with
transmission of the signal.
• The unit can be affected by signals
transmitted from the remote control of a
television, VCR or other equipment used in
the same room.
• Do not leave the remote control in direct
sunlight or near a heater. Also,protect the unit
and remote control from moisture and shock
which can discolour or damage them.
Receiver window
TINSEA830JBRZ_Multi.indd 4 VUIFN13H 2013/8/6 14:55:49