Thermia 12 ZP-TI, Руководство по эксплуатации

Страница: 10 / 68

GB-8
PLASMACLUSTER OPERATION FULL POWER OPERATION
In this operation, the air/air heat pump
works at the maximum power to make the
room cool or warm rapidly.
1
During operation, press the
FULL POWER button.
• The remote control will display “ ”.
• The temperature display will go off.
• The green FULL POWER lamp ( )
on the unit will light up.
TO CANCEL
Press the FULL POWER button again.
• The FULL POWER operation will also be can-
celled when the operation mode is changed,
or when the unit is turned off.
• The green FULL POWER lamp ( ) on
the unit will turn off.
NOTE:
• The air/air heat pump will operate at “Extra
HIGH” fan speed for 15 minutes, and then
shift to “HIGH” fan speed.
• You can not set the temperature or fan speed
during the FULL POWER operation.
• To turn off the FULL POWER lamp, press the
DISPLAY button.
1
A c t i v e a i r p u r i f i c a t i o n m o d e w i t h
plasmacluster ions. Actively reduces
airborne mold.
1
Press the PLASMACLUSTER
button during operation.
• The remote control will display “ ”.
• The blue PLASMACLUSTER lamp on the
unit will light up.
2
If you pressed the button
while unit is not in operation,
Plasmacluster operation starts
in fan only mode.
1
2
TO CANCEL
Press the PLASMACLUSTER button
again.
• The blue PLASMACLUSTER lamp on the unit
will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the
next time you turn on the air/air heat pump.
• To turn off the PLASMACLUSTER lamp,
press the DISPLAY button.
TINSEA830JBRZ_Multi.indd 8 VUIFN13H 2013/8/6 14:55:49