Thermann TIHP 300, Инструкция по эксплуатации и монтажу

Страница: 10 / 28

10 INSTALLATION INSTRUCTIONS
unpacKInG the Water heater
note
Ensure that the casing material in the lower section will not be damaged.
note
The longer you keep the packaging foil wrapped around the water heater, the longer it will be protected
against damage.
f f
Remove the packaging straps.
f f Push the packaging foil far enough upwards that the pallet is freely accessible.
f f
Remove the water heater carefully with the polystyrene® packaging from the pallet.
!
WarnInG Injury
The water heater has a high centre of gravity and a low overturning point. ensure that the water heater
does not overturn when you remove it from its pallet.
D
00
00
04
08
84
f f Slide the packaging foil far enough upwards to be able to remove the first polystyrene® profiles from the sides.
These polystyrene® profiles on the sides are used as installation aids in the following steps.