Thermann 125THMB118, Руководство пользователя

Страница: 2 / 16

i
Thermann Owner’s Guide
Electric and Gas Storage Water Heaters
IMPORTANT SAFETY INFORMATION
WARNING – THIS APPLIANCE
MAY DELIVER WATER AT HIGH
TEMPERATURE. REFER TO THE
PLUMBING CODE OF AUSTRALIA
(PCA), LOCAL REQUIREMENTS
AND INSTALLATION INSTRUCTIONS
TO DETERMINE IF ADDITIONAL
DELIVERY TEMPERATURE CONTROL
IS REQUIRED.
WARNING – FOR CONTINUED
SAFETY OF THIS APPLIANCE IT
MUST BE INSTALLED, OPERATED
AND MAINTAINED IN ACCORDANCE
WITH THE MANUFACTURER’S
INSTRUCTIONS .
This water heater is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the water
heater by a person responsible for their
safety.
Children should be supervised to
ensure they do not interfere with
the water heater. Ensure animals are
supervised so they do not interfere
with the water heater.
DO NOT SPRAY AEROSOLS IN THE
VICINITY OF THIS APPLIANCE WHILE
IT IS IN OPERATION.
DO NOT USE OR STORE FLAMMABLE
MATERIALS IN OR NEAR THIS
APPLIANCE.
DO NOT PLACE ARTICLES ON OR
AGAINST THIS APPLIANCE.
DO NOT MODIFY THIS APPLIANCE.
DO NOT operate the water heater with
any panels or covers removed.
If the water heater is not used for two
weeks or more, a quantity of hydrogen
(which is highly flammable) may
accumulate inside the water heater tank.
To dissipate this gas safely it is
recommended that a hot tap be turned
on for several minutes at a sink, basin
or bath, but not a dishwasher, clothes
washer or other appliance.
During this procedure there must be
no smoking, open flame or any other
electrical appliance operating nearby. If
hydrogen is discharged through the tap
it will probably make a sound similar to
air escaping.
RELIEF VALVE:
The Pressure & Temperature Relief
(PTR) Valve must be installed directly
into the RP½” (DN15) socket marked
“RELIEF VALVE”.
The PTR valve rating is 1,000 kPa and
10 kW on electric water heaters.
The PTR valve rating is 1,400 kPa and
10kW on gas storage water heaters.
The valve must not be tampered with
or removed. The water heater must not
be operated unless this valve is fitted
and in working order.