Page 10 of 14
To raise the temperature:
Press the plus button to raise the temperature. Each time you press
or hold the plus button, the temperature will go up 1ºF until it reaches
86ºF (30ºC).
To lower the temperature:
Press the minus button to lower the temperature. Each time you
press or hold the minus button, the temperature will go down 1ºF
until it reaches 64ºF (18ºC).
To set Timer for a 1- to 24-hour delay before air conditioner is
turned off (air conditioner must be on):
1. Press TIMER. Indicator light on air conditioner control panel will
flash.
2. Press the plus or minus button to change the delay time from 1 to
24 hours.
3. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, keeping previous
settings:
1. Turn off air conditioner.
2. Press TIMER. Indicator light on air conditioner control panel will
flash.
3. Press the plus or minus button to change delay time (1 to 24
hours).
4. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on.
To set Timer to turn on air conditioner, changing the previous
settings:
1. Turn on air conditioner.
2. Adjust Mode to Cool, Fan Only, or Power Saver.
3. Adjust Fan Speed to Turbo, High or low, or Auto.
4. Adjust temperature between 64ºF (18ºC) and 86ºF (30ºC).
5. Turn off Air Conditioner.
6. Press TIMER. Indicator light on air conditioner control panel will
flash.
7. Press the plus or minus button to change delay time (1 to 24
hours).
8. Press TIMER again or wait 10 seconds. Indicator light on air
conditioner control panel will remain on
_______________________________________________________
Changing Air Direction
Roll the wheel to direct the air right or left. Rotate the whole cartridge
to direct air up, down, or straight ahead.
_______________________________________________________
Normal Sounds
When your air conditioner is operating normally, you may hear
sounds such as:
Clicking Sound. The water droplets help cool the condenser.
Air movement from the fan.
Clicks from the thermostat cycle
Vibrations or noise due to poor wall or window construction.
A high-pitched hum or pulsating noise caused by the modern high-
efficiency compressor cycling on and off.
