![Thermal Zone 420-0027 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/thermal-zone/420-0027/420-0027_installation-and-operation-manual_1103398008.webp)
Page 8 of 19
4.
Use a 3/16” drill bit to drill 3 starter holes 3/8” deep
through the 3 holes in the cabinet and into the windowsill.
5.
Attach cabinet to windowsill with 3 - #10 x 3/8 pan-head
Phillips screws.
6.
Check that air conditioner cabinet is tilted to the outside so
that water will run to the outside.
__________________________________________________
Attach Side Curtains to Window Frame
__________________________________________________
1.
Pull Left-hand curtain out until it fits into window channel.
Use a 3/32” drill bit to drill a starter hole through the hole in
the curtain housing and into the lower windows sash.
2.
Insert one of the #10 x ¾” round-head screws through hole
and into lower window sash. Insert one of the #10 x ¾”
round-head screws through threaded hole in top of curtain.
3.
Repeat for right-hand curtain.
_______________________________________________________
Complete Window Installation
_______________________________________________________
1.
Insert foam seal behind the top of the lower window sash
and against the glass of the upper window.
2.
Place window-lock bracket on top of lower window and
against upper window sash.
3.
Use a 3/32” drill bit to drill a starter hole through the hole in
the bracket and into the window sash.
4.
Attach window-lock bracket to window sash with #10 x ¾”
round-head screw to secure window in place.
______________________________________________________________________________________________________________________
Through-the Wall Cabinet Installation
NOTES:
•
Handle air conditioner gently
•
Be sure your air conditioner cabinet doe not fall out of the
opening during installation or removal.
•
The location where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded 3
prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of the air
conditioner.
•
It is the customer’s responsibility and obligation to have
this product installed by a qualified technician familiar with
through-the-wall room air conditioner installations