Page 7 of 19
Attach Side Curtains
______________________________________________
1.
Locate provided bag of screws
2.
Insert top and bottom of right-hand curtain housing in
top and bottom curtain guides on air-conditioner
cabinet.
Back View
Bottom View
3.
Extend right-hand curtain outward so you may insert
the first screw through the middle hole of the curtain.
Using a #10 x ¼” pan-head Phillips screw, screw
curtain to middle hole in air conditioner cabinet.
NOTE:
This screw is required to correctly attach
curtain (top to bottom) to the air conditioner cabinet.
4.
While the right-hand curtain is still extended, insert a
#10 x ¼” pan-head Phillips screw into the top and
bottom sides of the curtain. Screw curtain to the top
and bottom holes in the air conditioner cabinet.
NOTE:
Some curtains may have 2 slots at each end.
You will be able to see a mounting hole through the
correct slot.
5.
Slide curtain housing into guides as far as it will go.
6.
Repeat above steps for left-hand curtain.
Attach Foam Adhesive Seal
_______________________________________________________
Attach foam adhesive seal along the bottom of the curtain bottom
channel.
Install Cabinet into Window
_______________________________________________________
•
Handle air conditioner gently
•
Be sure your air conditioner cabinet does not fall out of the
opening during installation or removal.
•
The location where the power cord exits the air conditioner
should be no more than 4 ft (122 cm) from a grounded 3
prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of the air
conditioner.
1.
Center empty cabinet in window. Check that lower rail of
air conditioner cabinet is behind and against back side of
windowsill. Maintain a firm hold on the air conditioner
cabinet. Lower window sash to hold cabinet in place.
2.
Measure the distance between the right-hand side of the
cabinet and the inside of the window channel.
3.
Repeat for the left side. Adjust the cabinet until the
distance on each side is the same.
