background image

Page 15 of 17 

from the product manufacturer and must not be 
repaired. 
 

__________________________________________ 
Air conditioner seems to run too much 
__________________________________________ 
The current air conditioner replaced an older 
model.

 The use of more efficient components may 

cause the air conditioner to run longer than an older 
model, but the total energy consumption will be less. 
Newer air conditioners do not emit the blast of cold 
air you may be accustomed to from older units, but 
this is not an indication of lesser cooling capacity or 
efficiency. Refer to the efficiency rating (EER) and 
capacity rating (in BTU/hr.) marked on the air 
conditioner. 
 

The air conditioner is in a heavily occupied room, 
or heat-producing appliances are in use in the 
room. 

Use exhaust vent fans while cooking or 

bathing and try not to use heat producing appliances 
during the hottest part of the day. A higher capacity 
air conditioner may be required, depending on the 
size of the room being cooled. 

__________________________________________ 
Air Conditioner cycles on and off too much, or 
does not cool/heat room in cooling/heating mode 
__________________________________________ 
The mode of Fan control is set to Power Saver 
(on some models). 

Use Power Saver only when you 

are asleep or away from home, since the fan does 
not circulate the room air continuously. Use Low 
Cool, High Cool, or Turbo Cool for your best comfort. 
 

The air conditioner is not properly sized for your 
room. 

Check the cooling capabilities of your room air 
conditioner. Room air conditioners are not designed 
to cool multiple rooms. 
 

The filter is dirty or obstructed by debris.

 Clean 

the filter. 
 

The inside evaporator and outside condenser 
coils are dirty or obstructed by debris. 

See 

“Annual Maintenance. 
 

There is excessive heat or moisture (open 
container cooking, showers, etc.) in the room.

 

Use a fan to exhaust heat or moisture from the room. 
Try not to use heat-producing appliances during the 
hottest part of the day. 
 
 

 
 

The louvers are blocked. 

Install the air conditioner 

in a location where the louvers are free from curtains, 
blinds, furniture, etc. 
 

The outside temperature is below 65ºF (18ºC).

 Do 

not try to operate your air conditioner in the cooling 
mode when the outside temperature is below 65ºF 
(18ºC). 
 

 

The temperature of the room you are trying to 
cool is extremely hot.

 Allow extra time for the air 

conditioner to cool off a very hot room. 
 

Windows or doors to the outside are open. 

Close 

all windows and doors. 
 

The Vent control is set to OPEN (on some 
models).

 Push the Vent control to CLOSED for 

maximum cooling and/or heating. 
 

The temperature set point or  
Thermostat control is not at a cool enough 
setting.

 Adjust the temperature set point to a cooler 

setting by pressing the minus button to reduce the 
temperature or adjust the Thermostat control to a 
cooler setting by turning the knob clockwise. Turn the 
Fan control to HIGH or Turbo Cool. 
 
__________________________________________ 

Temperature on display does not match room 
temperature 
__________________________________________ 
When the compressor and fan motor turn off 
during Power Saver mode, or after you turn off 
the unit, a lower temperature reading than the 
actual room temperature may be displayed for a 
short period of time.

 This lower temperature 

reading is caused by the temperature sensor being 
located close to the cold evaporator coil. The actual 
room temperature will display within a few minutes. 

__________________________________________ 
Water drips from cabinet into your house 
__________________________________________ 
The air conditioner is not properly leveled.

 The air 

conditioner should slope slightly downward toward 
the outside. Level the air conditioner to provide a 
downward slope toward the outside to ensure proper 
drainage. See the Installation instructions. 
 

NOTE:

 Do not drill a hole into the bottom of the metal 

base and condensate pan. 

 
 
 
 
 
 
 

Содержание 420-0018


















Отзывы: