background image

Page 14 of 17 

 

 

3.  Use a vacuum cleaner to clean air filter. If air 

filter is very dirty, wash it in warm water with a 
mild detergent. Do not wash air filter in the 
dishwasher or use any chemical cleaners. Air dry 
filter completely before replacing to ensure 
maximum efficiency. 

4.  Replace air filter by sliding filter back into either 

side of unit. 

__________________________________________ 

Cleaning the Front Panel 

1.  Turn off the air conditioner 
2.  Remove the air filter and clean it separately. See 

Cleaning the Air Filter. 

3.  Wipe the front panel with a soft damp cloth. 
4.  Air dry front panel completely. 
 

 

Repairing Paint Damage 

Check once or twice a year for paint damage. This is 
very important, especially in areas near oceans or 
where rust is a problem. If needed, Touchup with a 
good grade enamel paint. 
 

NOTE: 

To reduce paint damage during the winter, 

install a heavy duty cover over the air conditioner 
cabinet. 

__________________________________________

 

Annual Maintenance 

Your air conditioner needs annual maintenance to 
help ensure steady, top performance throughout the 
year. Call your local authorized dealer to schedule an 
annual checkup. The expense of an annual 
inspection is your responsibility. 

____________________________________________________________________________________________ 

TROUBLESHOOTING 

Before calling for service, try the suggestions below to see whether you can solve your problem without outside help. 
__________________________________________ 
Air conditioner will not operate 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The power supply cord is unplugged. 

Plug into a 

grounded 3 prong outlet. See “Electrical 
Requirements”. 
 

The power supply cord has tripped (Reset button 
has popped out).

 Press and release RESET (listen 

for click; Reset button will latch and remain in) to 
resume operation. 
 

A household fuse has blown, or a circuit breaker 
has tripped. 

Replace the fuse or reset the circuit 

breaker. If the problem continues, call an electrician. 
See “Electrical Requirements”. 
 

Depending on model, the Power button has not 
been pressed or the Fan control is turned to OFF.

 

Press POWER or turn the Fan control to an active 
setting. 
 

The local power has failed. 

Wait for power to be 

restored. 
 

 
__________________________________________ 

Air conditioner blows fuses or trips circuit 

breakers 

__________________________________________ 

Too many appliances are being used on the 
same circuit.

 Unplug or relocate appliances that 

share the same circuit. 
 

Time-delay fuse or circuit breaker of the wrong 
capacity is being used.

 Replace with a time-delay 

fuse or circuit breaker of the correct capacity. See 
“Electrical Requirements”. 
 

An extension cord is being used.

 Do not use an 

extension cord with this or any other appliance. 
 

You are trying to restart the air conditioner too 
soon after turning the unit off. 

Wait at least 3 

minutes after turning the unit off before trying to 
restart the air conditioner. 

__________________________________________

 

Air Conditioner power supply cord trips (Reset 
button pops out) 
__________________________________________ 
Disturbances in your electrical current can trip 
(Reset button will pop out) the power supply 
cord.

 Press and release RESET (listen for click; 

Reset button will latch and remain in) to resume 
operation. 
 

Electrical overloading, overheating, pinched cord 
can trip (Reset button will pop out) the power 
supply cord. 

After correcting the problem, press and release 
RESET (listen for click; Reset button will latch and 
remain in) to resume operation. 
 

NOTE:

 a damaged power supply cord must be 

replaced with a new power supply cord obtained 

Содержание 420-0018


















Отзывы: