Thermal Solutions RC6600, Руководство пользователя

Страница: 23 / 37

3.2 Safety Precautions
Observe the following common safety precautions before installing the equipment:
•
Use separate, non-intersecting paths to route power and networking wires. If
power wiring and device wiring paths must be crossed make sure the wires are
perpendicular at the intersection point.
•
Keep the wires separated according to the interface. Wires that share similar
electrical characteristics must be bundled together.
•
Do not bundle input wiring with output wiring. Keep them separate.
•
When necessary, it is strongly advised that you label wiring to all devices in the
system.
3.3 Mounting Guide (optional)
The device comes with different mounting options suitable for most of the industrial
and commercial applications. There are two main mounting approaches - Vehicle
Mounting (Dash/ Yoke Mounting) and VESA Wall Mounting; both approaches are very
easy for user to set up the Panel PC.
IMPORTANT:
Perform mounting after you establish all the necessary connections. Refer
to Chapter 2 for wiring requirements and instructions.
3.3.1 VESA Mount
Pro-face America Rugged Display Computer compatible with VESA Mount solution.
Follow the instruction below to complete mounting.
Dimensions Screw hole diameter
75 x 75 mm M4x6
Compatible with swimming arms mounting kits