Thermal Dynamics AUTO-CUT 30 O2, Руководство по эксплуатации

Страница: 17 / 148

Manual No. 0-4818 Auto-Cut 300
2
2-1 SPECIFICATIONS
SECTION 2: SPECIFICATIONS
2.01 General Description Of The System
A typical Auto-Cut ® 30O
2
system configuration includes:
• One Power Supply
• Remote Arc Starter
• Gas Control Module
• Torch Valve Assembly
• Conventional Plasma Cutting Torch
• Set Of Connecting Leads
The components are connected at installation.
2.02 Plasma Power Supply
The power supply provides the necessary current for cutting operations. The power supply also monitors system
performance, and cools and circulates the liquid coolant for the torch and leads.
2.03 Remote Arc Starter
This unit produces a temporary HF pulse to start the pilot arc. The pilot arc creates a path for the main arc to
transfer to the work. When the main arc is established, the pilot arc shuts off.
2.04 Gas Control Module
This module allows remote setting of gas selection, pressures, and flows together with setting of cutting current.
2.05 Conventional Plasma Cutting Torch
The torch delivers the controlled current to the work through the main arc, causing the metal to be cut.