Thermal Arc C/W VFE 4C HS III, Руководство по эксплуатации

Страница: 23 / 74

A1. ON/OFF Switch This switch connects the Primary supply voltage to the power
supply when in the ‘ON’ position. This enables the Power Supply.
A3. Voltage Control Switch The Voltage Control switch increases the voltage as it is
rotated in the clockwise direction. (10 position switch on the Fabricator 250 C III and a
1 2 position switch on the 320 C III)
A4. Negative Welding Terminal The negative welding current flows from the Power
Source via the heavy duty DINSE terminals to the Metal plate via an earth lead. It is
essential, that the male plug is inserted and turned securely to achieve a sound electrical
connection.
( Compact 250C & 320C, maybe located in different position on front panel)
A5. Negative Welding Terminal A second negative polarity output from the Power Source
that offers two inductances of different values to the Metal plate via an earth lead. It is essential,
that the male plug is inserted and turned securely to achieve a sound electrical connection.
( Compact 320C only, maybe located in different position on front panel)
WARNING
Loose welding terminal connections can cause overheating and result in the male plug
being fused in the bayonet terminal.
A6. Control Panel see section 5.01 for further information
A7. Euro Torch Adaptor Euro torch connection that accepts Euro style MIG torches.
A8. Wire Feed Motor & Feed Roll Assembly
A9. Wire Spool Holder
A10. Gas inlet The Gas Inlet connections is a 3/8 BSP male gas fitting supplied via the
gas hose..
A11. Primary Power Cable The input cable connects the Primary supply voltage to the
equipment, see Section 3.04 for electrical input requirements.
A24. Gas Heater Outlet
– An o ption that is not installed on this unit.
17