Thermal Arc C/W VFE 4C HS III, Руководство по эксплуатации

Страница: 19 / 74

3.05 Input Power
Note
Note the available input power. Damage to the
machine
could occur if 4
6
0VAC or higher
is applied.
The following 400V Primary Current recommendations are required to obtain the
maximum welding current and duty cycle from this welding equipment:
WARNING
Exceeding the duty cycle ratings will cause the thermal overload protection circuit to
become energized and shut down the output until the unit has cooled to normal
operating temperature.
CAUTION
Continually exceeding the duty cycle ratings can cause damage to the welding power
source and will void the manufactures warranty .
NOTE
Due to variations that can occur in manufactured products, claimed performance,
voltages, ratings, all capacities, measurements, dimensions and weights quoted are
approximate only. Achievable capacities and ratings in use and operation will depend
upon correct installation, use, applications, maintenance and service.
Model Primary Supply
Lead Size (Factory
Fitted)
Primary Current
Circuit Size
(Vin/Amps)
Max Current &
Duty Cycle
Fabricator 250C III 4 core 2.5mm sq 400 / 14A 250 @ 30%
Fabricator 320C III 4 core 2.5mm sq 400 / 17.5A 340 @ 25%
Fabricator 320S III 4 core 2.5mm sq 400 / 17.5A 340 @ 25%
Fabricator 400S III 4 core 4mm sq 400V / 24A 420 @ 30%
Fabricator 500S III 4 core 4mm sq 400V / 43A 530 @ 25%
13