Thermablaster WLT060-VF, Руководство пользователя

Страница: 6 / 34

6
accessories, repair and service the heater. The term “qualified agency” means any individual, firm,
corporation, or company that either in person or through a representative is engaged in and is
responsible for:
a.) Installing, testing, or replacing gas piping or
b.) Connecting, installing, testing, repairing, or servicing equipment; that is experienced in such work; that
is familiar with all precautions required; and that has complied with all the requirement of the authority
having jurisdiction.
2 PRODUCT FEATURES
SAFETY PILOT
This heater has a pilot with an Oxygen Depletion Sensing (ODS) safety shutoff system. The ODS/pilot
shuts off the heater if there is not enough fresh air.
PIEZO IGNITION SYSTEM
This heater is equipped with a piezo igniting system. No power supply required.
GAS OPTIONS CAPABLE (Dual Fuel Models Only) (Models that start with WDFT)
If you have the dual fuel model, your heater is equipped to operate on either Propane or Natural gas. The
heater is shipped from the factory ready for connecting to Propane. The heater can easily be changed to
Natural gas by having your qualified installer follow the instructions and the markings on the heater.
THERMOSTATIC CONTROL
These heaters have a control valve with a thermostat sensing bulb. This results in the greatest heater
comfort and may result in lower gas bills.
LOCAL CODES
Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest
edition of The National Fuel Gas Code, ANSI Z223.1/ NFPA 54.
3. Preparing for installation
Before beginning assembly or operation of the product, make sure all parts are present. Compare parts
with package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.