1-800-533-7533
Quest
DRY
150 Installation, Operation and Maintenance Instructions
www.thermastor.com
quest
Asset Protection and IAQ Solutions
quest
FOR HVAC INSTALLER ONLY
Safety Precautions
Read the installation, operation and maintenance instructions carefully before installing and operating this
device. Proper adherence to these instructions is essential to obtain maximum benefit from your Quest
DRY
150 indoor air quality system.
FOR HVAC INSTALLER AND OWNER ONLY
READ AND SAVE THESE INSTRUCTIONS
• The device is designed to be installed INDOORS IN
A SPACE THAT IS PROTECTED FROM RAIN AND
FLOODING.
• Install the unit with space to access the back or side panels
for maintenance and service. DO NOT INSTALL UNIT
WITH THE SERVICE PANELS INACCESSIBLE.
• Avoid directing the discharge air at people, or over the
water in pool areas.
• If used near a pool or spa; be certain there is NO chance
the unit could fall into the water, be splashed and that it is
plugged into a GFI GROUND FAULT INTERRUPT OUTLET.
•
DO NOT use the device as a bench or table.
• DO NOT place the device directly on structural members.
Provide vibration isolation in order to minimize operational
vibration and/or noise.
• A drain pan MUST be placed under the unit if installed
above a living area or above an area where water leakage
could cause damage
