ISSUE 2016 Rev 1 - Installation Manual
3
ThermaQ
PRODUCT SPECIFICATIONS
Introduction
Congratulations on your purchase, of this Unvented Hot Water Storage Cylinder. This UK manufactured product is made from Duplex
stainless steel, which provides durability, resistance against corrosion, highly insulated with environmentally friendly foam, and then enclosed
in a rust resistant white steel case.
The cylinder is available in several formats: Direct and Indirect Single Coil models 120-300, Solar Single Coil and Solar Twin Coil models
180-300.
The cylinder is approved to comply with:
The Building Regulations 2000 (England and Wales) Approved Document G.
The Building Regulations (Scotland) 2000.
United Kingdom Water Supply (Water Fittings) Regulations / Scottish Water Byelaws.
This is through the high quality of its materials and construction, and is supplied complete with all necessary safety and control devices
needed to connect directly with the cold water mains supply.
Please ensure that you have understood this manual before starting the installation, and leave this guide with the user once the
installation is complete.
Benchmark
The Benchmark scheme places responsibilities on both manufacturers and installers. The purpose is to ensure that customers are provided
with the correct equipment for their needs, that it is installed, commissioned and serviced in accordance with the manufacturer’s instructions
by competent persons and that it meets the requirements of the appropriate Building Regulations and relevant electrical qualifications. The
Benchmark Checklist can be used to demonstrate compliance with Building Regulations and should be provided to the customer for future
reference.
Installers are required to carry out installation, commissioning and servicing work in accordance with the Benchmark Code of Practice which
is available from the Heating and Hotwater Industry Council who manage and promote the scheme.
Visit
www.centralheating.co.uk
for more information.
The HWA Charter
The Charter offers consumers quality assurance, product satisfaction and confidence in the manufacturer, that they will deliver a service
beyond just supplying the product.
The HWA Charter Code of Practice requires that all members adhere to the following:
•
To supply fit for purpose products clearly and honestly described
•
To supply products that meet or exceed appropriate standards, building and water regulations
•
To provide pre and post sales technical support
•
To provide clear and concise warranty details to customers.
3
