6
7
250
oPeraTing The TheraPure
®
250
Before using the Therapure
®
250 air purifier, please read the following important information.
Electrical Ratings:
120V Setting: 120Vac, 60 Hz
Power consumption: 60 watts at high fan speed,
4 watt UV light bulb
Net weight: 11.25 lbs.
Dimension (LxWxH): 11.2” x 9.8” x 28.15”
Replacement Parts:
Lamp – TPP 2500
Filter – TPP250F
Locate a level surface on which to place
the Therapure
®
250 air purifier near a 120V
outlet (follow warnings in the
“SAFETY
INSTRUCTIONS” and “IMPORTANT
WARNINGS”
sections of this manual).
Position your Therapure
®
at least one foot
(12 inches) from the wall. Plug in the unit.
oPeraTing The TheraPure
®
250
Controls/Settings
Power Control
– To operate the Therapure
®
250 air purifier,press the “ON/OFF” button to turn
on the air purifier, press the button again to turn off the air purifier.
Timer Control
– The Therapure
®
250 air purifier can be programed to turn off after a preset amount
of time. Press the “TIMER” button to program the timer. Each press will add one hour up to a total
of 24 hours. If you keep the button pressed, the timer will increase to 24 hours, after that it will turn
back to off.
ION Control
– Press the ION Control button to turn on the ions. Press it again to turn off the ions.
Speed Control
– The Therapure
®
250 has three different speeds of cleaning, LOW, MED and HI.
Press “SPEED” button to cycle the settings and select the fan speed you desire. The speed state
will be shown on the LCD display.
Uv Control
– Press the UV/VOC control button “UV/VOC” to turn on the UV lamp to kill harmful
airborne germs and reduce harmful VOC (volatile organic compounds). Press it again to turn off the
UV and VOC.
LCD Display
ION Button
Timer Button
Speed Button
Power Button
Uv/vOC Button
