MAINTAINING YOUR
ALLCLEAR
™
FILTER:
WARNING:
Before performing any maintenance, always unplug the AllClear™ Filter from the
power source.
Over time the effectiveness of the UV-C bulb will degrade. We recommend replacing the UV-C
bulb once a year, even if the bulb operates, to maintain maximum results. See REPLACEMENT
PARTS for replacement bulbs.
The quartz sleeve should be cleaned yearly or when water clarity is reduced. Replace the quartz
sleeve if it is scratched, damaged, or cracked. See REPLACEMENT PARTS for replacement Filter
Top with Quartz Sleeve.
Watch a video of the AllClear
™
Filter maintenance online @
www.thepondguy.com/allclear
Remove Bracket
REMOVE the screws securing the power cord retaining
bracket.
Unscrew UV Transformer
UNSCREW UV Transformer and gently pull out the UV
transformer and bulb.
Remove Access Hatch
REMOVE the screws securing the access hatch. Then gently
lift to separate.
Replace the Bulb
PULL gently on the base of the UV-C bulb to remove. Insert
new bulb and reassemble unit. DO NOT touch the bulb with
bare hands.
Remove Clamp
REMOVE the filter canister clamp (on model 1200 unlatch
the four buckles).
Remove UV Housing
LIFT the filter canister top. Twist gently and pull to remove
the UV housing and expose the quartz sleeve.
Clean Quartz Sleeve
CLEAN quartz sleeve with a soft cloth or sponge and
reassemble unit.
Disconnect Plumbing
DISCONNECT plumbing by unscrewing the step down
fittings from the AllClear™ Filter.
Continued...
thepondguy.com | 866-POND-HELP (766-3435)
15425 Chets Way | Armada, MI 48005
8
9
