Themis T2GPX XMC, Руководство по установке

Страница: 38 / 46

T2GPX XMC Graphics Card Installation Manual
Version 1.0
B-2
Themis Computer
Figure B-1 , page B-4, shows the location of all bottom-side solder beads on the
T2GPX XMC Graphics Card and their default setting.
Table B-1 is arranged in groups by functionality, and all solder beads within each
specific functionality will be listed in numerical order.
Caution: When dealing with a 3-pin solder-bead switch, a solder bead will short
only one set of pins, either 1–2 or 2–3.
If a solder bead shorts more than 2 pins, call Themis Customer Support.
Table B-1.
T2GPX XMC Graphics Card Solder-Bead Settings (Bottom Side)
Solder
Bead
Setting
a
Description
SB1
Short
A short on all the listed solder beads is required for the T2GPX
XMC Graphics Card to operate as designed (normal state).
Open
SB4
Short
Open
SB5
Short
Open
SB6
Short
Open
SB7
Short
Open
SB8
Short
Open
SB9
Short
Open
SB10
Short
Open
SB13
Short
Open