Themis T2GPX XMC, Руководство по установке

Страница: 27 / 46

2-1
Themis Computer
2
Hardware and Software Installation
2.1 Hardware Installation
The T2GPX XMC Graphics Card can be installed within any product that supports
XMC module-card protocol, such as Themis XV2 single-board VME-based com-
puter system.
To install theT2GPX XMC Graphics Card, follow these steps:
1. Remove the blank PMC/XMC faceplate or existing card from the XMC mod-
ule slot on the host system board (see
Figure 2-1 on page 2-2).
2. Insert the T2GPX into the XMC-card opening with the proper orientation and
align the XMC connector with the mating connector on the host board.
3. Press the XMC connector into the mating host-PCB connector until the
T2GPX is firmly seated.
4. To secure the T2GPX to the host PCB, use two threaded standoffs on the
T2GPX (see
Figure 2-2 , page 2-2) and attach to the two mounting holes (see
Figure 2-1 ) on the host PCB with two M2.5x5mm panhead screws.
Attach the two threaded standoffs to the host PCB with the two screws.
Important: If your T2GPX card is being installed into a system that has
standoffs already attached to the host PCB, the T2GPX standoffs should be
removed. All necessary hardware will be provided with the order.
Installation
Section
Chapter