Themis T2GPX XMC, Руководство по установке

Страница: 37 / 46

B-1
Themis Computer
B
Solder Beads
This appendix provides solder-bead locations and configurations for the T2GPX XMC
Graphics Card.
Solder beads are considered “factory-configurable” and must not be
altered by the user. If a solder bead requires reconfiguration, contact Themis Customer
Service.
B.1 Factory-Configurable Solder Beads
B.1.1 T2GPX XMC Graphics Card Solder Beads
Solder beads are only found on the bottom side of the T2GPX XMC Graphics Card.
All solder beads are described in
Table B-1 on page B-2.
In Table B-1 , Short means a solder bead is installed, creating an electrical path
between two contacts. Open means no solder bead is installed, hence the path
between the contacts is open.
Warning: Solder beads are set by Themis at the factory. Attempting to alter a sol-
der-bead configuration could seriously damage the T2GPX XMC Graphics Card. If
you encounter a problem, contact Themis Customer Support.
DO NOT ATTEMPT TO ALTER SOLDER-BEAD CONFIGURATIONS.
Appendix