Themis RES-32XR3/FIO, Руководство по установке

Страница: 91 / 142

3-27
Themis Computer
BIOS Setup Utility
Advanced Setup Configurations
3.3.14.1 Channel Number
Enter the channel number for the SET LAN Config command. This is initially set to
[01] . Press “+” or “-” on your keyboard to change the Channel Number.
3.3.14.2 Channel Number Status
This feature returns the channel status for the Channel Number selected above:
Channel Number is “OK” or “Wrong Channel Number”.
3.3.15 IP Address Source
Select the source of this machine's IP address. If Static is selected, you will need to
know and enter manually the IP address of this machine below. If DHCP is selected,
the BIOS will search for a DHCP (Dynamic Host Configuration Protocol) server in
the network it is attached to, and request the next available IP address. The options
are
DHCP and Static.
The following items are assigned IP addresses automatically if DHCP is selected
under IP Address Source above
:
IP Address
Enter the IP address for this machine. This should be in decimal and in dotted quad
form, (i.e., 192.168.10.253). The value of each three-digit number separated by dots
should not exceed 255 as shown in the screen below.
Subnet Mask
Subnet masks tell the network which subnet this machine belongs to. The value of
each three-digit number separated by dots should not exceed 255.
Gateway Address
This is the IP address of the gateway in the network. This is usually a router.
3.3.16 Mac Address
The BIOS will automatically enter the Mac address of this machine; however it may
be over-ridden. Mac addresses are 6 two-digit hexadecimal numbers (Base 16, 0 ~ 9,
A, B, C, D, E, F) separated by dots. (i.e., 00.30.48.D0.D4.60).