Thecus i8500 Скачать руководство пользователя страница 34

Страница: 34 / 86

- 34 -

“Good”

the hard drive is good.

“Failed”

the hard drive is failed.

“Error Alert”

S.M.A.R.T. error alert.

“Read Errors”

the hard drive has unrecoverable

read errors.

Usage

“RD”

AID

isk. This hard drive has been set to

RAID.

“FR”

ee disk. This hard drive is free for use.

“DS”

edicated

pare. This hard drive has been

set to the dedicated spare of the RG.

“GS”

lobal

pare. This hard drive has been set to

a global spare of all RGs.

“RS”

erve. The hard drive contains the RG

information but cannot be used. It may be
caused by an uncompleted RG set, or hot-plug of
this disk in the running time. In order to protect
the data in the disk, the status changes to
reserve. It can be reused after setting it to “FR”
manually.

Vendor

Hard drive vendor.

Serial

Hard drive serial number.

Type

Hard drive type.

“SATA”

SATA disk.

“SATA2”

SATA II disk.

Write cache

Hard drive write cache is enabled or disabled.

Standby

HDD auto spindown to save power. The default value
is disabled.

•

PD operations description:

Set Free disk

Make the selected hard drive to be free for use.

Set Global
spare

Set the selected hard drive to global spare of all RGs.

Содержание i8500























































































Результаты поиска

Содержание i8500

Отзывы:

Похожие инструкции для i8500

Бренды по названию

Популярные бренды

Thecus i8500, Руководство пользователя

Результаты поиска

Содержание i8500

Отзывы:

Похожие инструкции для i8500

Бренды по названию

Популярные бренды