Thecus i8500 Скачать руководство пользователя страница 16

Страница: 16 / 86

- 16 -

2.4.2 System

buzzer

The system buzzer features are listed below:

1. The system buzzer alarms 1 second when system boots up

successfully.

2. The system buzzer alarms continuously when there is error occurred.

The alarm will be stopped after error resolved or be muted.

3. The alarm will be muted automatically when the error is resolved. E.g.,

when RAID 5 is degraded and alarm rings immediately, user
changes/adds one physical disk for rebuilding. When the rebuilding is
done, the alarm will be muted automatically.

2.4.3 LED

The LED features are listed below:

Marquee / Disk Status / Disk Rebuilding LED

: The Marquee / Disk

Status / Disk Rebuilding LEDs are displayed in the same LEDs. The
LEDs indicates different functions in different stages.

Marquee LEDs

: When system powers on and successfully boots

up, the Marquee LED is on until the system boots successful.

II.

Disk status LEDs

: the LEDs reflect the disk status for the tray.

Only On/Off situation.

III.

Disk rebuilding LEDs

: the LEDs are blinking when the disks are

under rebuilding.

Disk Access LED

: Hardware activated LED when accessing disks (IO).

Disk Power LED

: Hardware activated LED when the disks are plugged

in and powered on.

System status LED

: Used to reflect the system status by turning on

the LED when error occurs or RAID malfunction happens.

Management LAN port LED

: GREEN LED is for LAN transmit/receive

indication. ORANGE LED is for LAN port 10/100 LINK indication.

BUSY LED

: Hardware activated LED when the front-end channel is

busy.

POWER LED

: Hardware activated LED when system is powered on.

Содержание i8500























































































Результаты поиска

Содержание i8500

Отзывы:

Похожие инструкции для i8500

Бренды по названию

Популярные бренды

Thecus i8500, Руководство пользователя

Результаты поиска

Содержание i8500

Отзывы:

Похожие инструкции для i8500

Бренды по названию

Популярные бренды