Thecus 1U4200, Руководство пользователя

Страница: 142 / 185

142
On the Nsync target server, the administrator of that server has to set up a user
account with a folder named “nsync” and grant write access.
1. On the Nsync server, add a user for Nsync source (ex. nsyncsource1). For
instructions on how to add a user on the Thecus IP storage, see Chapter 4:
User and Groups Authentication> Local User Configuration >
Add
Users .
2. On the Nsync server, grant that user (ex. nsyncsource1) write access to the
nsync folder. For instructions on how to set up a folder’s ACL, see
Chapter 4: Starage Management> Shore Folder> Folder Access
Control List (ACL) .
3. Once this is done, the target server will start accepting Nsync tasks from
server using that ID and password.
Setting Up an Nsync Target on another Device other than Thecus IP
storage
If you selected “
Legacy FTP Server ” when setting up your Nsync task, the Thecus IP
storage will use the FTP protocol to back up the share folder. On the external storage
device, make sure there is a folder named “nsync”, and the Auth ID has writable
permission in that folder.
Designating Thecus IP storage as an Nsync Target
The Thecus IP storage can act as an Nsync server, enabling another Nsync-equipped
Thecus NAS at a remote location backup their files to this Thecus IP storage. From
the System Network menu, choose the Nsync Target item, and the Nsync
Target Server screen appears.
Nsync Target Server Setting
Item Description
Nsync Target Server Enable or Disable Nsync Target support.
Nsync Target (Does not apply to the 3X series)
From the Backup menu, choose the Nsync Target item, and the Nsync Setting
screen appears. Enable or Disable your Nsync Target Server. Press Apply to confirm
your settings.
If the Thecus Nsync feature has chose to use Rsync to replicate data between two
systems. For the target side to allow source cross data, the Rsync target server
needs to assign a username and password for authentication.
Once Nsync Target has been enabled, the other Thecus NAS product is able to
operate remote replication to this NAS system.
NOTE
To enable Nsync task to go thru firewall, you have to open port TCP/1194 on
your firewall in both directions.