Theben RAMSES 784 HF, Руководство по эксплуатации

Страница: 6 / 14

R RE EC C 1 1
Connection is made at terminals
1, 2, 3.
* Circulating pump, actuator for radiators
etc.
-> For the connection of a boiler (gas/oil)
use the connecting terminals 1-2 (in
accordance with manufacturer data).
18
For operation of RAMSES 784 HF follow the sections:
R RE EC C 1 1
1. Alignment of the antenna
Assumption: The product REC 1 is connected to mains voltage.
For optimum reception, the antenna must be in a vertical position. In a few exceptional
cases, interference signals can be received from the surrounding area. Depending on the
strength of the interference several LEDS may be illuminated.
-> Align the antenna in such a way that as few LED’s as possible are illuminated.
-> Do not install the antenna near water or electrical circuits!
2. Optimising the reception quality
The channel C1 at the receiver must be OFF, i.e. the corresponding status display(s)
(LED) must be OFF . To connect RAMSES 784 HF to the power supply and set time etc.,
follow the instructions:
-> Set rotary switch on the back (printed circuit) of RAMSES 784 HF to position 10
H HFF--TTee ss tt.
Installation and Operation
*
RAMSES 784 HF_309 484_GB 25.02.2011 8:37 Uhr Seite 5