The clock thermostat is battery powered. Depending on switching
frequency, you must change the batteries after approx. 12 months.
First time of operation:
11.. Note the polarity of the batteries.
22.. Place the batteries in the battery compartment.
Battery change necessary:
LED
3
flashes
Action:
Change the old batteries within 3 weeks.
If action not taken:
The LED is illuminated after this for a few days
continuously.
Afterwards the clock stops, the heating switches on
continuously, but is not controlled.
Changing batteries:
1.
Take out the used batteries.
2.
Dispose of the batteries in an environmentally
friendly way.
3. Use only new similar type alkaline cells LR6.
4.
Note the polarity and fit the batteries.
Recommendation:
Check the batteries from time to time. Leaking
batteries damage your product.
17
A
Override switching C1 ON/OFF
B
Status display channel C1
C
Level display for reception quality
D
Antenna connection
R
RE
EC
C 1
1
– The device is designed for installation on DIN top hat rails (in accordance with
EN 60715) or
– for wall installation with wall installation set
RAMSES 784 HF_309 484_GB 25.02.2011 8:37 Uhr Seite 4
